Filter
Top Products
USER’S GUIDE
4–34
When the installed flash memory card or HDD card is formatted:
When you enter this mode menu with the formatted flash memory card or
HDD card installed, the display shows the following menus:
Display Message Flash Operation
EXECUTE DATA Select the data ID and execute the selected
data. This menu appears only when any data
has been saved on the card.
CARD LIST Print out the contents of the flash memory
card or the HDD card. This menu appears
only when anything has been saved in the
card.
SAVE Save received data, macros, and fonts.
DELETE Delete items from the card.
✒ Note
A common use of the flash memory is with FORMS software packages.
With these commercially available software packages you have an option to
send a form to the printer without any data. After you send the form to the
printer, you may save the form in the flash memory as a Macro. Then the
next time you want to print this form, you would setup your FORMS
software package to SEND DATA ONLY - USE FORM IN PRINTER. This
process would save you anything from 1 to 4 minutes per print job.
Select the setting menu and enter the sub-setting menu to change the
settings as follows:
■ Execute Data
✒ Note
This menu appears only when data has been saved on the card.
When you select “EXECUTE DATA,” you can execute any of the data
saved in the SAVE DATA mode.
When you enter this sub-setting menu with the SET switch, the printer
prompts you to select the ID of the data.
DATA ID=#####
Select the ID with the ▲ or ▼ switch and press the SET switch again, so that
the printer executes the selected data.