Filter
Top Products
IV - 14
1.20 Tray Sensor Holder
(1) Disengage the DU (Duplex) detection actuator from the hook and slide it to the outside.
(2) Loosen the screw and remove the holder by lifting it from the chassis.
PE sensor actuator tray, PE actuator link, DU detection actuator
1) Remove the PE actuator link from the PE sensor actuator tray.
2) Remove the PE actuator link from the tray sensor holder.
3) Remove the PE sensor actuator tray from the tray sensor holder.
4) Remove the DU detection actuator from the tray sensor holder.
Roller holder
Screws
Figure 4.32
1.21 Roller Holder
(1) Remove the gear 28.
(2) Loosen and pull out the 2 screws.
DU detection actuator
PE actuator link
Tray sensor holder
PE sensor actuator tray
Screw
Hook
Gear 28
Figure 4.33