Filter
Top Products
ASSEMBLY AND CONNECTIONS
2 - 2
Choosing a Location
Place your MFC on a flat stable surface, such as a desk. Select a place that
is free of vibration and shocks. Place the MFC near a telephone jack and a
standard, grounded power outlet. Choose a location where the temperature
remains between 50°F and 95°F (10°–35°C).
Avoid placing your MFC in a high-traffic area. Do not place near heaters,
air conditioners, water, chemicals, or refrigerators. Do not expose the
MFC to direct sunlight, excessive heat, moisture, or dust. Do not connect
your MFC to electrical outlets controlled by wall switches or automatic
timers. Disruption of power can wipe out information in the MFC’s
memory. Do not connect your MFC to electrical outlets on the same
circuit as large appliances or other equipment that might disrupt the power
supply. Avoid interference sources, such as speakers or the base units of
cordless phones.
NO !
NO ! NO !
WARNING
■
Use caution when installing or modifying telephone lines. Never touch
telephone wires or terminals that are not insulated unless the telephone
line has been disconnected at the wall jack. Never install telephone wiring
during a lightning storm. Never install a telephone jack in a wet location
unless the jack is specifically designed for a wet location.
■
Lightning and power surges can damage this product! We recommend that
you use a quality surge protection device on the AC power line and on the
telephone line, or unplug the lines during a lightning storm.
■
For PLUGGABLE EQUIPMENT, the socket-outlet should be installed
near the equipment and should be easily accessible.
■
To reduce the risk of shock or fire, use only a No. 26 AWG or larger
telecommunication line cord.