Filter
Top Products
COPY OPERATIONS
10 - 4
Document Type
You can select the Copy resolution for your type of original. The default
setting is AUTO, which is used for documents that contain both text and
photographs. TEXT is used for documents containing only text. PHOTO is
used for copying photographs.
1
Insert the original in the ADF or on
the scanner glass.
2
Press
Document Type
.
DOC TYPE:AUTO?
SELECT <- -> & SET
3
Press or to choose document type and press
Set
.
4
Press
Copy
.
5
Using the dial key pad, enter the number of copies.
6
Wait five seconds—OR—Press
Copy
again.
Enlarged or Reduced Copies
1
Place the original in the ADF or on the scanner glass.
2
Press
Enlarge/Reduce
.
3
Press or to choose an enlargement
ELG/RDC:100%
SELECT & SET
or reduction ratio.
You can reduce to AUTO, 93%, 87%, 75%, 50%, or 25% of the original
size
—OR—
You can enlarge to 120%, 125%, 141%, 150%, 200%, or 400%
—OR—
For more choices select ZOOM and press
Set
. Use the dial pad to enter
any percentage between 25% and 400%.
For example, press
5
,
3
to enter 53%.
4
Press
Copy
.
5
Using the dial pad, enter the number of copies.
6
Wait five seconds—OR—Press
Copy
again.
Select AUTO if you want the MFC automatically to reduce the original to
fit on the paper size you programmed (Function 1-2-6).