Filter
Top Products
WALK-UP VIDEO PRINTING
11 - 2
Setting Up Video Print Mode
Whenever you connect video
equipment to the Brother machine
and turn on the video signal, the
machine’s Copy keys automatically
switch to video printing mode
and the screen displays
VIDEO:PRESS COPY
CAPTURE READY
As soon as you turn off the video equipment or disconnect it, the Copy
keys return to normal Copy mode. If you have too much in memory, you
cannot access video printing mode.
Black and White Video Printing
1
With no originals in the ADF, plug the cable from your video camera’s
Video Out jack into the Brother machine’s RCA pin jack.
2
Play the video. When the Brother machine begins receiving the video
signals, the machine’s screen displays
VIDEO:PRESS COPY
CAPTURE READY
3
Press
Copy
when you see the picture you want to capture and print.
4
If you want to print multiple pages, use the dial pad to enter the number of
copies (up to 99).
5
Wait five seconds —OR—Press
Copy
again.
6
The machine begins printing, and beeps when finished.
If the Brother machine is not receiving video signals,
Copy
will not work.
However, if there is an original in the ADF, the machine will print a copy.