Filter
Top Products
SETUP RECEIVE
5 - 2
Setting Ring Delay
The Ring Delay setting determines the number of times the MFC rings
before it answers.
1
Press
Function
,
1
,
2
,
2
.
2
Press or to select how many times the line rings before the MFC
answers (00–04) and press
Set
. If you select 00, the line doesn’t ring at all.
3
Press
Stop
to exit.
Easy Receive
When you use this feature, you don’t have to press
Start
when you answer a
fax call. Selecting ON allows the MFC to receive fax calls automatically,
even if you lift the handset of an extension or external phone. When you
see RECEIVING on the fax screen or when you hear “chirps” through the
handset of an extension phone connected to another wall jack, just replace
the handset, and your MFC does the rest. Selecting OFF means you’ll
have to activate the MFC yourself, by pressing
Hook
, then
Start
to receive.
(See Manual Transmission, page 6-5.)—OR—by pressing
5
1
if you are not at your MFC. (See Operation from Extension
Telephones, page 5-5.)
If Easy Receive is OFF and an original is in the ADF, press
Hook
, then
Start
,
then
2
to activate the MFC.
If you’ve set the feature to ON, but your MFC doesn’t automatically
connect a fax call when you lift an external or extension phone handset,
press the Fax Receive code
5
1
.
If you send faxes from a computer on the same phone line and the MFC
intercepts them, set Easy Receive to OFF.
1
Press
Function
,
1
,
2
,
3
.
2
Use or to select ON or OFF and press
Set
.
3
Press
Stop
to exit.
Turning on Cassette #2
When CASSETTE #2 is set to ON, you can set paper size, reduction
setting and the cassette usage. (See Printing a Reduced Incoming
Document, page 5-3 and Setting Paper Size, page 5-3.)
1
Press
Function
,
1
,
0
,
4
.
2
Press or to select ON (or OFF) and press
Set
.
3
Press
Stop
to exit.