Filter
Top Products
SETUP SEND
6 - 4
Resolution
■
Press
Resolution
before you send the fax
to select the resolution for the original
you are sending. (See Multiple Resolution
Transmission, page 6-11.)
Standard—Suitable for most typed originals. (Fine and S. Fine lights
are off.)
Fine—Good for small print; transmits slower than standard resolution.
(Only the Fine light is on.)
Super Fine—Good for small print or artwork; transmits slower than
fine resolution. (Only the S. Fine light is on.)
Photo—Good for originals with varying shades of gray; slowest
transmission time. (Both Fine and S. Fine lights are on.)
Contrast
If your document is very light or very dark, you can set the contrast
accordingly. Use S.LIGHT to send a very light originals. Use S.DARK to
send a very dark original.
1
Insert the original in the ADF or on the scanner glass.
2
Press
Function
,
1
,
3
,
3
.
3
Use or to select AUTO, S.LIGHT or S.DARK and press
Set
.
4
Press
1
if you want to select additional settings. The display returns to
the SETUP SEND menu—OR—Press
2
if you are finished choosing
settings, and go to Step 5.
5
Enter a fax number and press
Start
to send a fax.
Automatic Transmission
This is the easiest way to send a fax. IMPORTANT: Do not press
Hook
.
1
Insert the original in the ADF or on the scanner glass.
2
Enter the fax number using One Touch, Speed Dial, Tel-index or the dial
pad. (See Speed Dialing, page 7-4.)
3
Press
Start
.