Filter
Top Products
SETUP SEND
6 - 6
Real Time Transmission
When you have a MEMORY FULL message, the MFC cannot continue
scanning pages into memory before sending. However, you can turn on
REALTIME TX.
1
Insert the original in the feeder or on the scanner glass.
2
Press
Function
,
1
,
3
,
8
.
8. REAL TIME TX
3
To change the default setting, press
REAL TIME:ON?
SELECT <- -> & SET
or to select ON (or OFF) and
press
Set
. Go to Step 5—OR—For
the next fax transmission only,
press
or to select NEXT FAX
ONLY and press
Set
.
4
For the next fax only, press or to select ON (or OFF) and press
Set
.
5
Press
1
if you want to select additional settings. The display returns to
the SETUP SEND menu—OR—Press
2
if you are finished choosing
settings and go to Step 6.
6
Enter fax number and press
Start
.
Checking the Jobs Status
Check memory for unsent jobs. (If no memory is clear, the screen displays
NO JOB WAITING.) (See Canceling Jobs in Memory, page 6-7.)
1
If the machine is idle, press
Function
,
1
,
4
.
—OR—
If the MFC is busy, press
Stop
.
2
If you have multiple jobs waiting, use or to scroll through the list.
3
Press
Stop
to exit.