Filter
Top Products
REMOTE FAX OPTIONS
8 - 1
Remote Fax Options
8
Paging and Fax Forwarding
You cannot use Paging and Fax Forwarding at the same time.
To use Paging or Fax Forwarding you must set Fax Storage to ON.
Programming a Paging Number
When Paging is selected, your MFC dials the pager number you’ve
programmed, and dials your Personal Identification Number (PIN) when
connected, to activate your pager and let you know you have a fax
message in the memory.
1
Press
Function
,
1
,
7
,
1
.
2
Press or until the screen displays
PAGING?
SELECT <- -> & SET
PAGING? and press
Set
.
3
Enter your pager phone number
PAG#:
ENTER & SET
(up to 20 digits) followed by and
press
Set
. Do not include the area code
if it is the same as that of your MFC.
For example,
1 8
0 0
5 5 5 1 2 3 4
.
4
If your pager requires a PIN, enter the PIN, press , press
Redial/Pause
, enter
your MFC telephone number followed by
and press
Set
.
For example,
1 2 3 4 5
Redial/Pause
1 8
0 0
5 2 1 2 8 4 6
.
—OR—
If you do not need a PIN, press
Redial/Pause
, enter the fax number of your
MFC, then press
and press
Set
.
For example,
Redial/Pause
1 8
0 0
5 2 1 2 8 4 6
.
5
Press
Stop
to exit.
You cannot change a Paging number or PIN remotely.
Press
Redial/Pause
for each 3.5 second delay, as needed.
8