Filter
Top Products
Port Statistics Screen
8H02-16 User’s Guide 6-57
Broadcasts (Read-only)
Displays the number of broadcasts transmitted and received.
Multicasts (Read-only)
Displays the number of multicasts transmitted and received.
Link Status (Read-only)
Displays either Link, No Link or N/A.
Port Type (Read-only)
Displays either RJ45 or MMF SC (multimode fiber, SC connector for
FE-100FX port).
Port Status (Read-only)
Indicates the status of the selected port. Possible values are ENABLED
and DISABLED.
Application (Read-only)
Displays BRIDGING, indicating that the port is operating as a bridge.
Operation Mode (Read-only)
Displays one of the following values:
• Standard Enet – The port can either transmit data or receive data, but
not both at the same time. The port is running at 10 Mbps.
• Full Duplex – The port can transmit and receive data at the same time.
The port is running at 20 Mbps.
6.20.1 Displaying Port Statistics
To display the statistics for any port, proceed as follows:
1. Use the arrow keys to highlight the Port # field.
2. Press the SPACE bar to increment (or press the DEL (delete) key to
decrement) the port number.
3. Press ENTER (neither the Port # field nor the statistics will change
until ENTER is pressed).