Filter
Top Products
System Resources Screen
8H02-16 User’s Guide 6-37
Flash Memory Installed (Read-only)
Indicates the amount of FLASH memory installed in the 8H02-16 and
how much is currently available.
DRAM Installed (Read-only)
Indicates the amount of DRAM installed in the 8H02-16 and how much
of it is currently available.
NVRAM Installed (Read-only)
Indicates the amount of NVRAM installed in the 8H02-16 and how much
of it is currently available.
Current Switch Utilization (Read-only)
Shows how much (percentage of capacity) the 8H02-16 is currently being
used.
Peak Switch Utilization (Read-only)
Shows the peak percentage of maximum switching capacity, since last
reset.
Reset Peak Switch Utilization (Toggle)
May be set to either YES or NO. YES resets the peak utilization.
CPU Management Reservation (Toggle)
May be set to OFF, LIMITED, or FULL.
• OFF – During high traffic loads, management is given a low priority
and bridging is given the highest priority. Frames are not dropped
unless they exceed the maximum throughput for the device. Latency is
at a minimum. However, contact with management might be lost.
• LIMITED – Management is given a higher priority. Frames may be
dropped, and management may be slow.
• FULL – Management is given the highest priority. Frames may be
dropped. Management is very responsive.