Filter
Top Products
General Configuration Screen
8H02-16 User’s Guide 6-15
6.6.4 Setting the Default Interface
The default interface is the interface channel for the designated default
gateway. Set the default interface by performing the following steps:
1. Use the arrow keys to highlight the Default Interface field.
2. Enter the interface number for the default gateway in this field with a
value from 1 to 16.
3. Press ENTER. If the interface number entered is a valid format, the
cursor returns to the beginning of the Default Interface field. If the
entry is not valid, the Event Message Line displays “PERMISSIBLE
RANGE: 1...16”. Local Management does not alter the current value,
but it does refresh the Default Interface field with the previous value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The Event Message Line at the top of the screen
displays “SAVED OK”.
6.6.5 Setting the TFTP Gateway IP Address
If the network TFTP server is located on a different IP subnet than the
8H02-16, a gateway IP address should be specified. To set the TFTP
gateway IP address, perform the following steps:
1. Use the arrow keys to highlight the TFTP Gateway IP Address field.
2. Enter the IP address of the TFTP gateway using the DDN format.
For example: 134.141.80.122
3. Press ENTER. If the TFTP gateway IP address entered is a valid
format, the cursor returns to the beginning of the TFTP Gateway IP
Address field. If the entry is not valid, the Event Message Line
displays “INVALID TFTP GATEWAY IP ADDRESS OR FORMAT
ENTERED”. Local Management does not alter the current value, but
it does refresh the TFTP Gateway IP Address field with the previous
value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The Event Message Line at the top of the screen
displays “SAVED OK”.