Cabletron Systems 8H02-16 Switch User Manual


 
Chapter 3: Installation
3-2 8H02-16 User’s Guide
3.3 8H02-16 OPTIONS
If the 8H02-16 is to be installed with optional Fast Ethernet Interface
Modules, refer to Appendix C for installation instructions. For more
information on the two Fast Ethernet Interface Modules and the two
optional memory kits, refer to Section 1.5, Optional Features.
3.4 INSTALLING THE 8H02-16
The 8H02-16 may be installed on a tabletop, shelf, or in a 19-inch rack.
Refer to Section 3.4.1 for information concerning a tabletop or shelf
installation. Section 3.4.2 describes the rackmount installation.
3.4.1 Tabletop or Shelf Installation
This section provides guidelines for installation on a tabletop or shelf.
Figure 3-1 Tabletop or Shelf Installation
Proceed to Section 3.4.3 for instructions about connecting power.
NOTE
Install the options first before proceeding to Section 3.4.
C
A
B
1742_06
A = 15 cm (6 in)
B = 46 cm (18 in)
C = 53 cm (21 in)
D = 213 cm (7 ft)
MMAC
PWR
CPU
RESET
8H02-16
COM
SmartSwitch 10/100
WITH S
ECURE
F
AST VIRTUAL NETWORKING
1X 2X 3X 4X 5X 6X 7X 8X 9X 10X 11X 12X 13X 14X 15 16
Smart
SWITCH
D