Filter
Top Products
Connecting to the Network
8H02-16 User’s Guide 3-9
Figure 3-7 FE-100TX Crossover Switch
Connect an FE-100TX to a twisted pair segment as follows:
1. Ensure that the device at the other end of the segment is connected to
the segment and is powered ON.
2. Connect the twisted pair segment to the module by inserting the RJ45
connector on the twisted pair segment into the RJ45 port on the
module. See Figure 3-7.
Position X
(crossed over)
1. RX+
2. RX-
3. TX+
4. NC
5. NC
6. TX-
7. NC
8. NC
FE-100TX
10
166505
100
x
=
Position =
(not crossed over)
1. TX+
2. TX-
3. RX+
4. NC
5. NC
6. RX-
7. NC
8. NC