Filter
Top Products
Connecting to the Network
8H02-16 User’s Guide 3-11
Fiber Optic Network Connection
1. Remove the protective plastic covers from the fiber optic ports on the
applicable port on the module and from the ends of the connectors.
2. Insert one end of the SC connector into the FE-100FX installed in the
8H02-16. See Figure 3-8.
3. At the other end of the fiber optic cable, attach the SC connector to the
other device.
Figure 3-8 FE-100FX Port
!
CAUTION
Do not touch the ends of the fiber optic strands, and do not let
the ends come in contact with dust, dirt, or other contaminants.
Contamination of the ends causes problems in data
transmissions. If the ends become contaminated, clean them
with alcohol using a soft, clean, lint free cloth.
174234
FE-1
00
FX
15
16
RX LED