Filter
Top Products
Chapter 3: Installation
3-4 8H02-16 User’s Guide
Attaching the Strain-Relief Bracket
Attach the strain-relief bracket to the front of the 8H02-16 as follows:
1. Locate the strain-relief bracket and four 8-32 x 3/8-inch pan-head
screws in the rackmount kit.
2. Attach the strain-relief bracket to the bottom of the 8H02-16 using the
four 8-32 x 3/8-inch pan-head screws (Figure 3-2).
Figure 3-2 Attaching the Strain-Relief Bracket
Do not attempt to attach the strain-relief bracket with screws
other than the 8-32 x 3/8-inch screws included with the
8H02-16. Use of longer screws may damage the unit or cause
electrical shock.
Strain-Relief Bracket
Screws (4)
174247
MMAC
8H02-16
COM
SmartSwitch 10/100
WITH
S
ECURE
F
AST VIRTUAL NETWORKING
1X 2X 3X 4X 5X 6X 7X 8X 9X 10X 11X 12X 13X 14X 15 16
PWR
CPU
RESET
Smart
SWITCH