Filter
Top Products
Full Duplex Configuration Screen
8H02-16 User’s Guide 6-33
Port Redirect Function
This screen allows the user to redirect traffic from one or multiple ports to
a specific destination port.
6.12 FULL DUPLEX CONFIGURATION SCREEN
The Full Duplex Configuration screen, Figure 6-11, allows the user to set
ports 1 through 14 for either Standard Ethernet or Full Duplex operation
and monitor each port to see whether or not it is enabled and linked to
another 10BASE-T device.
Access the Full Duplex Configuration screen from the Device Specific
Configuration Menu screen by using the arrow keys to highlight the Full
Duplex Configuration option in the Device Specific Configuration Menu
screen and press ENTER. The Full Duplex Configuration screen (Figure
6-11) appears.
Figure 6-11 Full Duplex Configuration Screen
Firmware Revision: XX.XX.XX
Full Duplex Configuration
174221
Device Name: 8H02-16
BOOTPROM Revision: XX.XX.XX
PORT #
1
2
3
4
5
6
7
8
LINK STATUS
Link
Link
Link
No Link
Link
Link
Link
Link
8H02-16 LOCAL MANAGEMENT
Event Message Line
SAVE
OPERATION MODE
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
[STANDARD ENET]
PORT STATUS
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
Set All Ports: [FULL]
RETURN
RETURN
[9-14]