Cabletron Systems 8H02-16 Switch User Manual


 
Chapter 1:
Introduction
1-6 8H02-16 User’s Guide
1.4 LOCAL MANAGEMENT FEATURES
Local Management provides the tools that allow management of the
8H02-16 and any of the optional Fast Ethernet Interface Modules
installed as ports 15 and 16. It also allows the following tasks to be
performed:
Assign an IP address and subnet mask to the 8H02-16.
Select a default gateway and default interface.
Control local and remote access.
Designate workstations to receive SNMP traps from the 8H02-16.
Configure module specific SNMP MIB objects including the IETF
Bridge MIB objects and many of the RMON MIB objects.
Chapter 6 provides detailed information about Local Management.
1.5 OPTIONAL FEATURES
The two optional Memory Upgrade Kits for the 8H02-16 SmartSwitch
are listed below:
The 8H02-16-MEM-UGK Memory Upgrade Kit provides an 8 MB
DRAM SIMM that allows the 8H02-16 to run SFS (Secure Fast
Switching) and all groups of RMON.
The 8H02-8D/4F-ADV Advanced Memory Upgrade Kit provides
8 MB DRAM, 4 MB of FLASH with a preloaded image, and image
diskettes that allows the 8H02-16 to run VLAN (Virtual Local Area
Network), SFS, and RMON.