Filter
Top Products
Network Tools
8H02-16 User’s Guide 6-61
bridge:
Syntax: bridge [ENABLE/DISABLE] [IFNUM/ALL]
Description: The bridge command allows bridge
management to be enabled or disabled at the
user’s request, either one at a time or all at once.
Specifying a single interface number will affect
the bridging status of that interface, while
specifying ALL will affect every interface.
Options: Not Applicable
Example:
defroute:
Syntax: defroute [interface number] [IP address]
Description: The defroute command allows the user to view,
set or delete the default IP route to a managed
device through the specified interface.
Options: Not Applicable
Example:
NetTools-> bridge disable all
NetTools-> bridge enable 1
051467
NetTools-> bridge disable 1
NetTools-> defroute 2 147.152.42.32
051469