Filter
Top Products
8H02-16 User’s Guide 3-1
CHAPTER 3
INSTALLATION
This chapter covers the following items:
• Required tools
• Unpacking the 8H02-16
• Installing the 8H02-16 on a shelf or into a standard rack
• Connecting to the power source
• Connecting to the network
3.1 REQUIRED TOOLS
A Phillips screwdriver is required to install the equipment.
3.2 UNPACKING THE 8H02-16
To unpack the shipment, proceed as follows:
1. Carefully remove the 8H02-16 from the shipping box. Save all
shipping material in case any items need to be returned.
2. Visually inspect the 8H02-16 and any optional equipment.
3. If there are any signs of damage, contact Cabletron Systems Technical
Support. Refer to Section 1.7, Getting Help, for details.
Only qualified personnel should install the 8H02-16.