Filter
Top Products
Device Configuration Menu Screen
8H02-16 User’s Guide 6-9
The following explains each Device Configuration menu screen as shown
in Figure 6-4:
GENERAL CONFIGURATION
The General Configuration screen allows the user to monitor and
configure operating parameters for the 8H02-16. For details, refer
to Section 6.6.
SNMP COMMUNITY NAMES
The SNMP Community Names screen allows the user to change or review
the community names used as access passwords for local management
operation. For details, refer to Section 6.7.
SNMP TRAPS
The SNMP Traps screen provides display and configuration access to the
table of IP addresses used for trap destinations and associated community
names. For details, refer to Section 6.8.
BRIDGE CONFIGURATION
The Bridge Configuration screen provides basic setup options for making
a bridge operational in the network. For details, refer to Section 6.10.
DEVICE SPECIFIC CONFIGURATION
The Device Specific Configuration screen allows the user to select one of
four screens to configure ports or check system resources specific to the
8H02-16. For details, refer to Section 6.11.