Filter
Top Products
Chapter 6: Local Management
6-48 8H02-16 User’s Guide
6.16 CLEAR NVRAM SCREEN
The Clear NVRAM screen shown in Figure 6-15 allows the user to clear
all user-entered parameters such as the IP address, Interface
Configuration, COM Port Configuration and Community Names from
NVRAM.
Access the Clear NVRAM screen from the Device Specific Configuration
screen by using the arrow keys to highlight the Clear NVRAM screen and
pressing ENTER. The Clear NVRAM screen appears.
Figure 6-15 Clear NVRAM Screen
!
CAUTION
Clearing NVRAM will result in the loss of all user-entered
parameters. Do not proceed unless this procedure is
completely understood.
Firmware Revision: XX.XX.XX
Clear NVRAM
Clear NVRAM: [YES]
174250
Device Name: 8H02-16
BOOTPROM Revision: XX.XX.XX
8H02-16 LOCAL MANAGEMENT
CLEARING NVRAM. REBOOT IN PROGRESS...
RETURNEXECUTE