Cabletron Systems 8H02-16 Switch User Manual


 
Appendix C: Optional Installations and Mode Switch Bank Settings
C-8 8H02-16 User’s Guide
4. See Figure C-5. Gently pull the faceplate of the 8H02-16 forward to
allow room for the Fast Ethernet Interface Modules to be aligned over
the connector.
5. Carefully lower the Fast Ethernet Interface Module onto the standoffs
while inserting the module connector into the associated motherboard
connector.
Figure C-5 Installing the Fast Ethernet Interface Module
6. Press down firmly on the Fast Ethernet Interface Module until the pins
slide all the way into the motherboard connector. Ensure that the Fast
Ethernet Interface Module seats flush on the standoffs.
7. Secure the Fast Ethernet Interface Module with the screws saved in
steps 2 and 3.
8. Installation is complete. Reinstall the chassis cover, reconnect all
network cables and reconnect the power cord to the 8H02-16.
1742-39
FE-100TX
10
100
16
15
Standoff
Standoffs
Module
Motherboard
Connector
Module
Connector
Faceplate