Filter
Top Products
Chapter 6: Local Management
6-50 8H02-16 User’s Guide
6.17 PORT REDIRECT FUNCTION SCREEN
The Port Redirect Function screen, Figure 6-17, allows the user to set
each one of the ports 1 through 16 as a source or destination port. A port
can be set to have one or more destination ports. For example, port 1 can
be set as a source port with three destinations, ports 2, 3, and 4. Traffic
from port 1 is then automatically redirected to ports 2, 3, and 4. Port 1 can
also serve as a destination port for other ports.
Access the Port Redirect Function screen from the Device Specific
Configuration Menu screen by using the arrow keys to highlight the Port
Redirect Function option and pressing ENTER. The Port Redirect
Function screen appears.
Figure 6-17 Port Redirect Function Screen
NOTE
Although all traffic from the source port (including errored
frames) is sent to the destination port, normal switching is still
performed for all frames on the source port.
Firmware Revision: XX.XX.XX
Port Redirect Function
174222
Device Name: 8H02-16
BOOTPROM Revision: XX.XX.XX
Source Port:
1
1
1
2
2
3
3
3
Destination Port:
2
3
4
1
3
4
5
6
8H02-16 LOCAL MANAGEMENT
Event Message Line
SAVE
PREVIOUS
RETURN
RETURN
NEXT
Source Port [1]
Destination Port [1] Status [ADD]