Filter
Top Products
Chapter 6: Local Management
6-26 8H02-16 User’s Guide
6.8 SNMP TRAPS SCREEN
Since the 8H02-16 is an SNMP compliant device, it sends messages to
multiple Network Management Stations to alert users of status changes.
The SNMP Traps screen is shown in Figure 6-8.
Access the SNMP Traps screen from the Device Configuration Menu
screen by using the arrow keys to highlight the SNMP Traps option and
pressing ENTER. The SNMP Traps screen shown in Figure 6-8 appears.
Figure 6-8 The SNMP Traps Screen
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms up to
eight destinations.
Trap Community Name (Modifiable)
Displays the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
Firmware Revision: XX.XX.XX
SNMP Traps
174217
Device Name: 8H02-16
BOOTPROM Revision: XX.XX.XX
Trap Community Name
public
public
public
public
public
public
public
public
8H02-16 LOCAL MANAGEMENT
Event Message Line
RETURNSAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]