Filter
Top Products
Chapter 6: Local Management
6-32 8H02-16 User’s Guide
The following explains each field of the Device Specific Configuration
Menu screen:
Full Duplex Configuration
The Full Duplex Configuration screen allows each port (1 to 14) to be set
for either Standard Ethernet or Full Duplex operation. The screen also
indicates whether or not each port is linked to another 10BASE-T device
and if that port is enabled.
System Resources
The System Resources screen displays the amount of FLASH memory,
DRAM, or NVRAM installed, details how much memory is available and
provides information on 8H02-16 operation.
High Speed Interface Configuration
The High Speed Interface Configuration screen indicates which High
Speed Interface Modules are installed in ports 15 and 16, their current
operating mode, and if the ports are Linked. It also permits the
Auto-Negotiation and Advertised Ability features to be enabled or
disabled.
FLASH Download
This screen allows the user to download information from FLASH
memory and force the 8H02-16 to download a new image file from a
TFTP server.
Clear NVRAM
This screen allows the user to reset NVRAM to the factory default
settings. All user-entered parameters such as the IP address and
Community Names are then replaced with the 8H02-16 default
configuration settings.
!
CAUTION
Do not proceed with this operation unless the forced download
procedure is completely understood.
!
CAUTION
Do not proceed with this operation unless the Clear NVRAM
procedure is completely understood.