Filter
Top Products
4‑41
Sending Documents
Using the Browse Key (Windows (SMB))
If you select [Windows (SMB)] as the protocol, you can specify a file server connected to a
specific network by pressing [Browse] on the File screen. You can specify a file server from a
workgroup.
1 Press (SEND).
2 Place your originals.
3
① Press [New Address].
② Press [File].
4
① Press the Protocol drop‑down list.
① Select [Windows (SMB)].
5
After turning the main power on, you must
wait for the time set in Startup Time Settings
to elapse before pressing [Browse]. Network
transmission is not possible until this startup
time has elapsed. (See Chapter 6, “Network
(imageCLASS MF7480/MF7470 Only),” in the
Reference Guide.)
6
① Select the desired workgroup.
② Press [Down].
To move up one level, press [Up].
If the desired workgroup is not displayed,
press [▼] or [▲] to scroll to the desired
workgroup.