Canon 2237B008AA All in One Printer User Manual


 
2‑13
Original and Paper
To prevent paper jams, do not use any of the following:
Wrinkled or creased paper
Curled or rolled paper
Coated paper
Torn paper
Damp paper
Very thin paper
Paper which has been printed on using a thermal transfer printer (Do not copy on the
reverse side.)
The following types of paper do not print well:
Highly textured paper
Very smooth paper
Shiny paper
Make sure the paper is free from dust, lint, and oil stains.
Be sure to test paper before purchasing large quantities.
Store all paper wrapped and on a flat surface until ready for use. Keep opened packs in
their original packaging in a cool, dry location.
Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative humidity.
Use only the transparencies designed for laser printers. Canon recommends you to use
Canon type transparencies with this machine.
Each paper drawer holds approximately 250 sheets of paper (22 lb bond (80 g/m
2
)).
Note the following points when using the stack bypass:
Paper Quantity: one to approximately 80 sheets (22 lb bond (80 g/m
2
), stack
approximately 3/8" (10 mm) high)
Paper Size: 3 3/4" x 5 7/8" to 11 3/4" x 17" (95 mm x 148 mm to 297 mm x 432 mm)
Paper Weight: 18 to 32 lb bond (64 to 128 g/m
2
)
Paper which has been rolled or curled must be straightened out prior to use, to allow
the paper to feed smoothly through the stack bypass (allowable curl amount: less than
3/8" (10 mm) for normal paper, less than 1/4" (5 mm) for heavyweight paper). There are
some types of paper stock which may meet the above specifications, but cannot be
fed into the stack bypass.
You can select standard inch paper, or A or B series paper.