Filter
Top Products
Setting Up and Using a Standard Relay Unit
6-3
6
Using a Relay Network
Setting Up and Using a Standard Relay Unit
This section shows you how to set up and manage a relay network with the
standard relay features provided in the machine.
Before you set up your machine to relay documents from the originator fax
machine, confirm the following points:
•Make sure your machine’s telephone number is correctly registered. (See
“Registering the Machine’s Telephone Number and Unit Name,” on p. 1-19.)
•Make sure the telephone number of the originator fax machine is registered on
your machine under a speed dialing key. (See “Setting Up One-Touch Speed
Dialing,” on p. 2-6, or “Setting Up Coded Speed Dialing,” on p. 2-15.)
• After your machine receives the document from the originator machine, it relays
the document to one or several destination units. Make sure the telephone
numbers of all the destination units are registered on your machine under speed
dialing keys. (See “Setting Up One-Touch Speed Dialing,” on p. 2-6, or “Setting Up
Coded Speed Dialing,” on p. 2-15.)
• Ask the originator if they would like to receive a report of successful transmissions
after your machine relays the document.
•Make sure the relay feature on your machine is turned ‘ON’.
Follow the procedure in this section to set up your machine as a relay unit. When
your machine is the relay unit, it receives the document from the originator, and
relays it to several other destinations.
Setting Your Machine as a Relay Unit
Follow this procedure to set your machine to participate in a relay network as a
relay unit.
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
Data
Registration