Filter
Top Products
Setting Up and Using a Standard Relay Unit
6-10
Using a Relay Network
6
5
Enter the password (up to seven digits) using the numeric
keys ➞ press [Set].
If you have not previously set a password, proceed to step 6.
The relay group is deleted.
6
Press [Stop] to return to the Standby mode.
NOTE
If the relay has been set for Timer Sending and the document is still in the memory,
you cannot delete the relay group until the document has been sent. In this case,
the following message is displayed. Wait until the document is sent before you
attempt to delete the relay group.
➞
4
1
7
5
2
8
6
3
9
0
Set
Stop