Filter
Top Products
Setting Up and Using a Standard Relay Unit
6-8
Using a Relay Network
6
4
Enter the two digit relay group number that you want to
change using the numeric keys ➞ press [Set].
You can also press [▼] or [▲] to select a relay group number.
The prompt <PASSWORD> will be displayed if you have previously set a
password. Proceed to step 5. Otherwise, proceed to step 6.
5
Enter the password (up to seven digits) using the numeric
keys ➞ press [Set].
If you have not previously set a password, proceed to step 6.
6
Press [▼] or [▲] to display the setting you want to change ➞
press [Set].
To change the settings for an item, follow the same procedure you used for the
initial setup of the relay group. (See “Setting Your Machine as a Relay Unit,” on p.
6-3.)
NOTE
•To delete an item, press (Clear) ➞
(Set).
•To turn ‘OFF’ the relay feature for the group and retain the group setup, press [▼] or
[▲] to display <10.RELAY B’CAST> ➞ press
(Set), and turn this feature ‘OFF’.
You do not have to delete the relay group to disable it temporarily.
•To change the password for your relay group, you have to first enter the old
password (it is not displayed as you enter it) ➞ press
(Set) ➞ enter a new
password (it is displayed as you enter it) ➞ press
(Set).
7
When you are finished making changes, press [Stop] to return
to the Standby mode.
➞
➞
4
1
7
5
2
8
6
3
9
0
Set
4
1
7
5
2
8
6
3
9
0
Set
Set
C
Set
Set
Set
Set
Stop