Filter
Top Products
Setting Up One-Touch Speed Dialing
2-10
2
Using Speed Dialing
16
Enter the time in 24-hour notation using the numeric keys
(e.g., 1:00 p.m. as 13:00) ➞ press [Set].
The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
NOTE
• If you want to clear the time you have set, press
(Stop) ➞ repeat the procedure
from the beginning ➞ press (Clear) at this step ➞ press
(Set).
• If you want to set another time, repeat the procedure from step 15.
•To end this procedure and return to the Standby mode, press
(Stop).
17
To continue registration, and set other options for the current
key, press [Data Registration].
18
If you want to set the transmission type, press [▼] or [▲] until
<3.TX TYPE> appears ➞ press [Set].
If you do not want to perform this setting, proceed to step 20.
19
Press [▼] or [▲] to select the desired transmission type ➞
press [Set].
There are several TX TYPE items to select. For details, see the table below.
●
If you select ‘REGULAR TX’:
❏ Proceed to step 20.
●
If you select another TX Type:
❏ Set the ITU-T password and subaddress for the feature you select.
❏ Proceed to step 20.
➞
➞
➞
4
1
7
5
2
8
6
3
9
0
Set
C
Set
Data
Registration
Set
Set