Filter
Top Products
Polling Other Fax Machines to Receive a Document
8-5
8
Using Polling
NOTE
You must press [Password] within five seconds of pressing
(Set) in step 6. If
you wait longer than the timeout interval before pressing [Password], the machine
starts dialing the number. The timeout interval can be turned ‘OFF’. (See “TX
(Send) Settings,” on p. 11-14.)
8
Enter the ITU-T password using the numeric keys ➞ press
[Set].
NOTE
You must enter the correct password, including , #, and spaces, set on the other
party’s machine. Otherwise, your machine cannot receive the document.
9
Press [Start].
The machine starts polling the other machine.
IMPORTANT
If the other machine is holding the document under a subaddress and/or
password, your subaddress and/or password must match the other party’s
subaddress and/or password.
Polling to Receive at a Preset Time
Follow this procedure to set the machine to poll another fax machine at a preset
time. Polling at a preset time enables you to conduct document transactions later at
night when the telephone rates are lower.
Before you set up polling at a preset time, make sure you have performed the
following tasks:
• Register the numbers of the fax machines you want to poll under one-touch speed
dialing keys or coded speed dialing codes. (See “Setting Up One-Touch Speed
Dialing,” on p. 2-6, or “Setting Up Coded Speed Dialing,” on p. 2-15.)
➞
Set
4
1
7
5
2
8
6
3
9
0
Set
Start