Filter
Top Products
Sending a Document to a Relay Unit for Relay Broadcasting
6-13
6
Using a Relay Network
NOTE
•You can adjust the resolution, contrast, and document type for scanning. (See
“Adjusting the Scan Settings,” on p. 3-4.)
•You can also specify a sender’s name with [TTI Selector]. (See “Selecting a
Sender’s Name,” on p. 3-6.)
2
Open all three one-touch speed dialing panels ➞ press
[Advanced Communication].
3
Press [▼] or [▲] to display <RELAY> ➞ press [Set].
4
Dial the telephone number of the relay unit ➞ press [Set].
You can specify the destination using regular dialing, one-touch speed dialing,
coded speed dialing, access code dialing, or directory dialing. (See “Using
Regular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32, or “Using
Directory Dialing,” on p. 2-39.)
5
Enter the ITU-T subaddress required to start the relay
broadcast on the other party’s fax machine using the numeric
keys ➞ press [Set].
NOTE
You must enter the correct subaddress, including , #, and spaces, set on the
other party’s machine. Otherwise, your machine cannot start a relay broadcast.
➞
➞
Advanced
Communication
Set
Set
4
1
7
5
2
8
6
3
9
0
Set