Filter
Top Products
Setting Up and Using the Optional Stamp Feature
10-18
Other Special Features
10
Setting Up and Using the Optional Stamp Feature
If the optional stamp feature is provided on your machine, you can set the machine
to stamp the front, lower left corner of every page you scan for sending.
Setting Up the Stamp Feature
Follow this procedure to set up the stamp feature.
IMPORTANT
The stamp feature is available as an option. If the stamp option is not provided on your
machine, you cannot access this setting.
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
3
Press [▼] or [▲] until <3.FAX SETTINGS> appears ➞ press
[Set].
4
Press [▼] or [▲] until <7.SYSTEM SETTINGS> appears ➞ press
[Set].
If the prompt <SYSTEM SETTINGS PASSWORD> is displayed, enter the System
Administrator’s password using the numeric keys ➞ press (Set).
➞
➞
Data
Registration
Set
Set
Set