Filter
Top Products
22 Paper Handling Chapter 3
X Setting The Paper Size And Type
For copying or photo printing (MP370), on the operation panel, you need to set the size and type
of paper loaded in the multi-purpose tray.
NOTE
• For copying, specify the paper size as described in Chapter 4.
• For photo printing, specify the paper size as described in Chapter 5.
• For documents printed from your computer, you can specify the paper size and type on your computer.
(See Software Guide, located on your Setup CD-ROM)
X Loading Paper
Loading Paper Other Than Envelopes
Follow this procedure:
1 Set the paper thickness lever to the right or left according to the paper
type.
NOTE
• For the appropriate paper thickness lever position for each paper type, see page 15.
• For details on setting the paper thickness lever, see page 21.
2 Open the multi-purpose tray , then pull
out the tray extension .
• The tray extension can be extended in two parts.
3 Place a stack of paper (print side up) in
the multi-purpose tray , and pinch the
paper guide and adjust it to the left
side of the stack .
IMPORTANT
• Make sure the stack does not exceed the paper
limit mark .
PC
1
2
A
1
2
B