Filter
Top Products
Chapter 10 Maintenance 81
Checking The Ink level
If you reset the ink counter when you installed/replaced the ink tanks, you can check the current
ink level of the ink tanks at any time.
To check the current ink level of the ink tanks, press [COPY], [SCAN], or [PHOTO PRINT].
The LCD will display the ink level for approx. three seconds.
Indicates the remaining ink volume at three different levels.
? Indicates the ink counter was not reset after replacing the ink tanks.
NOTE
• The LCD will not display the ink level when <LOW INK WARNING> is set to <OFF>.
3 Press [Set].
4 Use [
W
] or [
X
] to select <2.INK COUNT RESET>.
5 Press [Set].
• The LCD displays a message asking if you replaced the black ink tank.
NOTE
• Do not press any keys other than [
W
] or [
X
].
6 If you replaced the black ink tank, press [
W
]. If you did not, press [
X
].
• The LCD displays a message asking if you replaced the color ink tank.
7 If you replaced the color ink tank, press [
W
]. If you did not, press [
X
].
• The ink counter is now reset.
NOTE
• Press [Stop/Reset] to switch the machine to standby mode.
INK VOLUME
1.LOW INK WARNING
INK VOLUME
2.INK COUNT RESET
BLACK INK CHANGED?
- YES NO +
COLOR INK CHANGED?
- YES NO +
Ex:
COPY MODE
COL BLK