Filter
Top Products
Chapter 10 Maintenance 89
X Cleaning Your Machine
This section describes the necessary cleaning procedures for your machine.
CAUTION
• Be sure to turn OFF the power and disconnect the power cord before cleaning the machine.
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges. Use a soft cloth to avoid scratching the components.
• Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean
the machine; these can damage the machine's components.
Cleaning The Platen Glass And Document Cover
Cleaning The Exterior
Wipe the machine’s exterior with a clean, soft, lint-free cloth soaked in water and tightly wrung.
Cleaning The Roller
Clean the roller when paper does not feed correctly.
Follow this procedure:
Wipe the platen glass , and the inner side of the
document cover (white area) with a clean, soft,
lint-free cloth moistened with water. Then wipe with
a clean, soft, dry, lint-free cloth making sure not to
leave any residue, especially on the platen glass. If
you have trouble getting the scanning area clean, wipe
with diluted mild detergent (for dish washing).
1 Remove any paper from the multi-purpose tray.
2 Press [Additional Functions].
3 Use [
W
] or [
X
] to select <2.MAINTENANCE>.
4 Press [Set].
5 Use [
W
] or [
X
] to select <5.ROLLER CLEANING>.
6 Press [Set].
• The machine starts cleaning the roller.
7 When cleaning has finished, repeat steps 2 to 6 for a total of three times.
8 Load letter- or A4-size plain paper in the multi-purpose tray and repeat
steps 2 to 6 an additional three times.
A B
MAINTENANCE
5.ROLLER CLEANING
ROLLER CLEANING