Filter
Top Products
Chapter 10 Maintenance 79
4 Hold the empty ink tank’s tab and pull
forward to release. Lift out the ink tank.
CAUTION
• Do not remove the print head from the machine.
• Remove one ink tank at a time.
• Do not touch the round shaft , transparent
film , film cable , ink absorber (sponge
part) , or any metal parts.
IMPORTANT
• Discard the empty ink tank immediately
according to local laws and regulations for
disposal of consumables.
• Handle ink tanks carefully to avoid staining
clothing or the surrounding area.
5 Remove the new ink tank from its
packaging. Then hold the ink tank as
shown and remove the protective cap .
CAUTION
• Do not touch the ink port .
• Do not shake or drop the ink tank as the ink may
leak and stain your clothes or hands.
• Do not attempt to reattach the protective cap
once you remove it.
• Do not place the ink port in contact with any
other surface.
6 Insert the ink tank into the empty slot on
the print head.
• Press firmly on the ink tank's tab until it locks into
place.
IMPORTANT
• Set a black ink tank in the right slot of the print
head.
• Set a color ink tank in the left slot of the print
head.
7 If you need to replace another ink tank, repeat steps 4 to 6.
8 Close the inner cover.
CAUTION
• Press the center of the inner cover until the cover locks into place.
A B C D
A
B