Filter
Top Products
106 Troubleshooting Chapter 11
X When The [Alarm] Lamp Flashes
If a paper jam occurs while printing, the [Alarm] lamp flashes. Check the cause of the error below
and take corrective actions.
z If a message appears:
1 Check the message appearing on the LCD.
2 Follow the instructions and correct the error.
• For LCD messages, see page 107.
3 Press [Set] to resume operation.
• The [Alarm] lamp will stop flashing.
• If the error remains, turn OFF the machine and disconnect the power cord. Wait at least 15 seconds
then reconnect the power cord and turn ON the machine.
z If a message does not appear:
1 Turn OFF the machine and disconnect the power cord.
2 Wait at least five seconds, reconnect the power cord and turn the power ON.
• If the problem has been resolved, the [Alarm] lamp will stop flashing.
z If the [Alarm] lamp still flashes even after you have turned the power ON again:
Contact the Canon Customer Care Center.