Filter
Top Products
www.axxessid.com
Installation & User Guide
AX200 Installation & User Guide – July 2007
106
New doors can be added by simply plugging the DTU into the controller and returning back to the
PC. This will automatically start the new device wizard, which allows you to add the new
controller. There is no need to pre-program the controller at the PC first; all settings are handled
by the DTU. Note: - the DTU must be in the current controller list however it does not need to be
active for this function to work.
Adding Card Formats using a DTU
A single transaction can also be brought back to the PC by inserting the DTU into the controller
and whilst inserted, use a card at the reader. When you return to the PC the transaction will show
on the transaction screen. If it is an unknown card type, it will automatically start the card format
wizard allowing the addition of the card type to the database (subject to technology type).
The DTU does not contain any batteries, which might need replacing. It is powered directly from
the controller and at the PC by the plug-in power supply which connects to the RJ45 connecter
plug.
Data is permanently stored in the DTU without the need for batteries; this means the DTU can
easily be sent in the post to update for instance remote sites. On and offline controllers can be
combined within one system.
DTU Step by Step
1
2
3
4
5 6