Filter
Top Products
www.axxessid.com
Installation & User Guide
AX200 Installation & User Guide – July 2007
90
i- BOX Parameters
The diagram on the left shows all the i-box units configured on your PC. On-line units are
displayed in green. Clicking on + will display all the sensors connected to that i-box. Other than
the first two sensors which are already in the i-box, there are 14 empty ports for smart sensors to
be plugged in. Once a new sensor is plugged in, a new device wizard will be opened and you can
easily configure your sensor. Once a sensor is highlighted on the diagram, all the sensor settings
will be displayed on the screen.
The blue list on the bottom of the screen displays all the readings taken by all the online sensors.
Sensor Settings
Sensor’s specifications are displayed on the top of the page. Sensor Identity and Sensor Type
are automatically detected by the application once the sensor is connected to the i-box. These
values cannot be changed.
Note: the Serial Number of the sensor is not shown on this page however it is displayed on the
new device wizard once you plug in the sensor for the first time.