Filter
Top Products
www.axxessid.com
Installation & User Guide
AX200 Installation & User Guide – July 2007
67
Device Settings
Device settings tab mainly provides you with the
network settings of the selected unit. Every unit is
given a unique name by the application when
connected to the net work. You can change this name
at any time. To avoid any possible conflicts in the
network make sure you don’t choose a duplicate
name.
The IP address of the server is displayed at the
bottom of the page. The correct IP could easily be
obtained by clicking on the ? Button.
The Device IP Address however should be entered
manually. The first three numbers are identical with
the first three numbers of the Server IP. The fourth
number could be anything from 1 to 254. The question
mark is to make sure that the device IP address is not
in use.
The name of the doors connected to the controller is
shown in the middle of the screen. To change them
you need to go back to the Access Point tab.
Clicking on the Advanced button provides you with
more information about the current device such as the
firmware version or the MAC address.