Filter
Top Products
www.axxessid.com
Installation & User Guide
AX200 Installation & User Guide – July 2007
93
The default maximum value is 5 seconds. This means, when the I-box sends a transaction to the
PC it will wait for a response from the PC. If it does not receive any response it will wait for 5
seconds before sending another message. This number is doubled with every try, until it reaches
80 seconds (Minimum Timeout).
Accumulation Period
Number of seconds that the transactions will be accumulated in the transaction queue in the I-box
before they are sent (applicable in case of block transaction: max 15 transactions can be in a
block). If it is set to 2 sec then all the transactions accumulated during 2 sec will be sent.
It’s the delay period of block transaction but if the queue is already filled with 15 transactions it is
sent anyway.
The bottom part of the page contains some information about the network settings on the i-box
such as the IP address, MAC Address and… it also displays the access identity of the readers
connected to the access control ports on the back of the i-box.
PDU (Power Distribution Unit)
The Power Distribution Units (PDU) are part of the family of plug & play sensors manufactured by
Axxess Identification; representing a streamlined and more efficient use of power delivery into the
rack environment.