Filter
Top Products
www.axxessid.com
Installation & User Guide
AX200 Installation & User Guide – July 2007
57
Door Comments
This memo field can store additional details regarding the location or any other use e.g.
temporarily out of use due to building work
Every reader can be programmed as Normal, In Reader and Out Reader.
If a reader is set to operate as an In Reader, the card number and the person’s name would
appear on the “who’s in list” when the card is presented to it.
If a reader is programmed to be an Out Reader, the card number and the person’s name would
be removed from the “who’s in list” and appear on the “who’s out list” when the card is presented
to the reader.
If a reader is set on Normal mode, access will be granted to the person holding a valid card.
However it doesn’t affect the who’s in/out list. In other words it doesn’t influence the count of the
people inside the building.
Time settings button becomes active by ticking the Door schedule box and clicking on the save
button.
You can schedule a door to be open during a specific period of time by clicking on the “Time
Settings” button. The door can be programmed simply by clicking and dragging the mouse. The
green zone is the time period during which the door will be unlocked.
Note: Please note that the door status selected in the main screen overrides the door schedule.
This means that once the door has been unlocked by using the controller buttons on the main
screen, it will remain open even thought it has been scheduled to be closed.
CCTV: opens the CCTV configuration window. You will then have to either enter the IP address
of the PC running the I-Catcher software or enter address of the web page containing the
camera.