Filter
Top Products
13-4
Only items that contain data appear on the data item selection screen. If there are too many
data items to fit on a single screen, the list scrolls when you move the cursor to the bottom line
of the items on the screen.
S To execute a send operation
After selecting the data items to send, press (TRAN). A message appears to confirm that
you want to execute the send operation.
• (Yes) ... sends data
• (No) ... returns to data selection screen
Press (Yes) to send the data.
• You can interrupt a data operation at any time by pressing .
The following shows what the displays of the sending and receiving units look like after the
data communication operation is complete.
Sending Unit Receiving Unit
Press ) to return to the data communication main menu.
I Configuring the Receiver’s Wakeup Feature
When Wakeup is turned on the receiver, the receiver turns on automatically when data transfer
starts.
fx-7400G
II
• The receiver enters the receive mode automatically after it wakes up.
All models except fx-7400G
II
• When communicating between two calculators (3PIN selected as the cable type), the
receiver enters the receive mode automatically after it wakes up.
• When communication is with a computer (USB selected as the cable type), connecting the
USB cable to a computer and then to the calculator (while the calculator is turned off) will
cause the calculator to turn on and the “Select Connection Mode” dialog box to appear.