Filter
Top Products
5-9
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01
Chapter 5 Installing Software on the CiscoWorks 1105 and 1130 WLSE
Upgrade Methods
repository source ftp://source/path
where source is the hostname or IP address of the FTP server on which the image
resides and path is the path to the image files.
If the message “unable to obtain file” appears, you have entered the wrong
password.
Step 3 List the contents of the source by using the following command. This command
requires a valid username and password on the remote FTP server.
repository list remote
Step 4 Download the software to the repository by using the following command. This
command requires a valid username and password on the remote FTP server.
repository add package
where package is the name of the software image to be transferred. For example,
if the zip file is named WLSE-2.5-K9.zip, the package would be WLSE-2.5-K9.
Step 5 To verify the contents of the repository, use the following command. This
command requires a valid username and password on the remote FTP server.
repository list
Step 6 Go to Install the Software, page 5-11
Create a Repository on a Windows Server
The remote repository created on a Windows server is temporary; it will no longer
exist after the server reboots.
To use a Windows NT, Windows 2000, or Windows XP server as a remote
repository: