Filter
Top Products
Chapter 2 Preparing to Install the CiscoWorks 1130 Wireless LAN Solution Engine
Safety
2-6
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01
General Precautions
Observe the following general precautions when using and working with your
system:
• Keep your system components away from radiators and heat sources, and do
not block cooling vents.
• Do not spill food or liquids on your system components, and never operate
the product in a wet environment. If the computer gets wet, see the
appropriate chapter in your troubleshooting guide or contact the Cisco
Technical Assistance Center. For instructions on contacting the Technical
Assistance Center, see “Obtaining Technical Assistance” in the Preface.
• Do not push any objects into the openings of your system components. Doing
so can cause fire or electric shock by shorting out interior components.
• Position system cables and power cables carefully; route system cables and
the power cable and plug so that they cannot be stepped on or tripped over.
Be sure that nothing rests on your system components’ cables or power cable.
• Do not modify power cables or plugs. Consult a licensed electrician or your
power company for site modifications. Always follow your local/national
wiring rules.
• To help avoid possible damage to the system board, wait 5 seconds after
turning off the system before removing a component from the system board
or disconnecting a peripheral device from the computer.