Filter
Top Products
4-23
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01
Chapter 4 Configuring the CiscoWorks 1105 and 1130 WLSE
Setting Up Device Management
Note When you set up the WLSE (see Adding AAA Servers to the WLSE,
page 4-28), you will need the IP address or name of the system that is
running CiscoSecure ACS Server.
Step 2 Click User Setup on the left side of the initial page.
Step 3 Enter a username for the user the WLSE will use for synthetic transactions and
click Add/Edit.
Step 4 Enter a password in the first set of Password and Confirm Password textboxes.
Click Submit.
Note When you set up the WLSE (see Adding AAA Servers to the WLSE,
page 4-28), you will need this name and password.
Step 5 Click Network Configuration on the left side of the page.
Step 6 Click Add Entry. In the Add AAA Client area, enter the WLSE information in
the following text boxes:
• Client Hostname—enter the WLSE hostname (or IP address)
• Client IP—enter the WLSE IP address
• Key—enter a secret key
Note You will need this key when you add AAA servers to the WLSE.
Adding AAA Servers to the WLSE, page 4-28
Step 7 Select RADIUS (Cisco Aironet) from the Authenticate Using list.
Step 8 Click Submit or Submit+Restart. A restart is required for the changes to take
effect.