Filter
Top Products
Chapter 5 Installing Software on the CiscoWorks 1105 and 1130 WLSE
Upgrade Methods
5-12
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-15903-01
Upgrading from the Recovery CD
If you have a recovery CD with the release of the WLSE software you want to
install, you can use the CD to upgrade your WLSE.
Note Although every effort has been made to validate the accuracy of the software
version on the recovery CD, you must review WLSE software versions on
Cisco.com and download and install any required earlier updates. For information
on installing such updates, see the readme files that accompany software updates
on Cisco.com.
Caution This procedure will destroy all data and install a new image. You will need to
replace the data by restoring a backup. For information on backups, see the online
help or the User Guide for the Wireless LAN Solution Engine, Release 2.5.
To reimage the WLSE, use the following procedure.
Procedure
Step 1 Connect a console to the WLSE’s console port.
• For the WLSE 1105, use the serial port on the front panel; do not use the serial
port on the back panel as a console port.
• For the WLSE 1130, the serial/console port is on the back panel.
Step 2 Log in as the admin user.
Step 3 Put the recovery CD in the CD drive.
Step 4 Enter the following command; the WLSE will reboot.
reload
Step 5 At the following prompt, enter yes:
Caution If you decide not to reimage the WLSE, enter rescue. For more information about
the rescue image, see the User Guide for the Wireless LAN Solution Engine,
Release 2.5.